INGREDIENTS
• 1L whole milk (UHT)
• 30 grams skim milk powder
• 10 grams inulin
• 500mg grams B. lactis BLa80 freeze-dried powder

STEPS


1. Hydrate the powders: Whisk 30 grams skim milk powder and 10 grams inulin into cold 1L whole milk until fully dissolved, then rest for 15 minutes so the powder hydrates fully. This lifts total solids to roughly 15%.


2. Heat treat: Heat to 85-90°C and hold for 20-30 minutes, stirring occasionally. Do this even with UHT milk, because the added powder isn't sterile. It also denatures whey proteins for a firmer gel and drives off oxygen.

3. Cool and inoculate: Cool to 38-40°C. Rehydrate 500mg grams B. lactis BLa80 freeze-dried powder in a few tablespoons of the cooled milk, then stir gently through the batch without whipping in air.


4. Ferment: Fill sanitised jars to the brim and seal to minimise headspace. Incubate at 37-40°C until pH reaches 4.6-4.8 and the milk sets softly, typically 14-20 hours.

Check pH with a meter. Without a yoghurt starter, this is your safety and endpoint measure.


5. Chill fast: Refrigerate below 4°C within 1-2 hours to halt acidification, then hold overnight before serving so the texture settles.